Menu

Technical

All the technical documents for the DLRO10

Filtrar por aplicación
    Mostrando artículo/s 1 de 1 en total
Continuity and Low Resistance Testing
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Times; color: #e12000} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Times; color: #797979} span.s1 {font: 12.0px Times; color: #797979} No electrical test is simpler...and few more commonly employed…than the continuity test. This simple test is a ubiquitous option on multimeters (DMMs) and insulation testers. It is simple to perform; connect two leads across opposite ends of the test item (IUT), press the test button, and within seconds you have the resistance reading. Low is good, high is bad. It’s so simple and easy that it is readily applied to testing situations that require a more rigorous performance from the test instrument. This article will examine the parameters that determine the separation between the types of instrumentation.
Publicado: 14 noviembre 2018
Leer el artículo completo