Menu
Soporte
Biblioteca Técnica

Biblioteca Técnica

La biblioteca técnica de Megger ofrece acceso a una amplia gama de contenidos y recursos, tales como guías técnicas, notas aplicativas y mucho más. Cuando usted se registra y crea una cuenta Megger, usted podrá entre otras cosas, registrar su producto y tener acceso a una amplia gama de actualizaciones de software y descarga para su productos.

Filtrar por aplicación
    Mostrando artículo/s 1 - 10 de 152 en total
Case Study on IDAX300 and VAX020
The Power Grid Corporation of India Limited (PGCIL) is an Indian state-owned company headquartered in Gurugram (North India) engaged mainly in Trans-mission  of  Power  and  transmits  about  50%  of  the  total  power  generated  in  India  on  its  transmission  network.  The  company  owns  and  operates  about  1,61,790  circuit  kms  of  transmission  lines  at  800/765 kV,  400 kV,  220 kV  &  132 kV EHVAC and +500 kV HVDC levels and 248 sub-stations. Also, it has the transformation capacity of about 396 825 MVA as of 30th November 2019.
Publicado: 26 agosto 2020
Descargar PDF
TTRU3 Factory ratio testing of power transformer
Transformer equipment manufacturers (OEMs) have a critical need to measure true ratio, as they must confirm proper manufacture of their transformers during construction and final assembly. Improper construction has consequences of higher cost, late delivery, and poor quality. The ability of a ratio instrument to be used for all steps involved makes it a practical valueto OEMs because only one instrument is purchased and used throughout each stage. Only the most reliable and accurate instruments make it to the factory floor. Winding stack under constructionre used: Art Mandigo Winding Service.
Publicado: 3 agosto 2020
Descargar PDF
Testing frequency relays with SVERKER900 considering the IEC 60255-181 standard
This application note is more than a description of how to use SVERKER 900 for testing frequency relays. It also wantsto spread the knowledge about IEC standardization in relay protection. Many engineers often associate theIEC series of protection standards IEC 60255-1xx1to relay type testing, and believe that they do not need to have competence about this series of standards. This is a misunderstanding: many of the concepts, definitions and test procedures described in thestandards are there to be used in relay technique, no matter if the role is relay manufacturer, user, or commissioning / maintenance testing engineer ([2], [3]).
Publicado: 30 julio 2020
Descargar PDF
DLRO2: long test lead test mode
When measuring very low resistance the four-wire test method has for many years been the standard method. The main advantage being that it simply and easily removes the resistance of the test leads from the measurement. However, what happens when those test leads need to be verylong?
Publicado: 27 julio 2020
Descargar PDF
DLRO2: new difference meter
Introducing the first low resistance ohmmeter to feature a difference meter, a device that turns changes in resistance into a moving pointer and percentage change. When testing multiple similar connections, it makes it easy to spot those small increases in resistance that eventually turn into major faults.
Publicado: 27 julio 2020
Descargar PDF
One touch OLTC with the TTRU3
Completing turns ratio tests on all transformer taps can be a cumbersome process. With One Touch OLTC from the TTRU3, anyone can configure and test all taps within a few short minutes.
Publicado: 22 abril 2020
Descargar PDF
TTRU3 Calibration verification
When performing calibration verification of the TTRU3, the following factors need to be considered to achieve accurate measurements and prevent damage to your calibration fixture or TTRU3.
Publicado: 20 febrero 2020
Descargar PDF
UPS noise detection using BITE3 and MPQ1000
Not all product demonstrations go as planned. Unforeseen problems can arise, causing the demonstration to go awry. We can either accept this as a failure or use it to create an opportunity. 
Publicado: 5 febrero 2020
Descargar PDF
Power Cable Fault Locating Safety Notice
REQUIREMENTS FOR SAFE WORK ENVIRONMENT WHEN PERFORMING MV or LV POWER CABLE FAULT LOCATING BY DISCHARGING A HIGH VOLTAGE CAPACITOR.
Publicado: 20 septiembre 2019
Descargar PDF
TTRU3 Phase Shifting Transformer App note
The is capable of performing turns ratio tests on any phase shifting transformer by allow-ing for phase shifts to be entered with respect to the secondary winding. But with all of the differ-ent ways phase shift is expressed, how do you know if the entered phase shift value is correct?
Publicado: 22 agosto 2019
Descargar PDF
  • 1
  • 2
  • 3
  • 4
  • 5
  • ...
  • >
  • Mostrando artículo/s 1 - 10 de 152 en total